Loading ...
TOOLS
within one year from the date of
THE UNITED STATES, and
free of charge.
'commercial or rental purposes, warranty will apply for ninety days from
.:the:date of purchase, .
-_This warranty applies only while this product is in the United States.
you specific legal rights and you may also have other rights which vary from state
Sears, Roebuck and Co., D817 WA Hoffman Estates, IL. 60179
safety instructions for scroll saw
-Safety is a combination of Common sense, staying a|ed WHEN INSTALLING OR MOVING THE SAW
"and knowing how your scroll saw works. Read this man-
ualto understand this saw.
Safety Signal Words
DANGER: means if the safety information is not followed
someone will be seriously injured or killed.
WARNING: means ifthe safety information is not followed
-someone could be seriously injured or killed.
CAUTION: means ifthe safety information isnot followed
someone may be injured.
BEFORE USINGTHE SAW
[ WARNING: TO avoid mistakes that could cause I
t setious permanent injury, do not plug the saw in
!
] until the following steps are completed.
., Assembly and alignment. (See pages 7 - 14).
-. Leamtlie_:use_ and:function of the speed control ON-
AVOID DANGEROUS ENVIRONMENT. Use the saw in
a dry, indoor place, protected from rain. Keep work area
wel! lighted.
To avoid injury from unexpected saw movement:
• T_m saw offand unplug cord before moving the saw.
• Always get help before moving the saw. The saw with
stand, weighs 135 pounds. You could strain your back
or the saw could fall on you.
• Put the saw on a firm level surface where there is
plenty of room for handling and properly supporting the
workpiece.
o Support the saw so the table is level and the saw does
not rock.
• Boll the stand to the floor if it tends to slip, walk, or slide
during operations like cutting long heavy boards, or
when using an auxiliary table.
guard,(Seepages i4_-1i5) ,;-; ......... i_ _ _- - '_..
- Review ahdUhderstandatt,S_,fety_irist_cti0'ns!ar_d opei ;_
ating:procedures in:this hladuai.-: _ ::- :.:_ :i:,:
• Review 0f the maintenance :instrQctioi_s for this saw.
(Seep,_ge_9):• :::' " : : :_
Read the warning label below, found on the base of the
saw.
OFE ik'iiob_;beVe|:_10Ckkdbb,=bladeholders, blade sup- NEVER STAND ON TOOL. Serious injury could occur it
p0rt; h0ia:a0wn,blade:tension -knob, and blade the tool tips or you accidentally hit the cutting tool. Do not
store anything above or near the tool where anyone
might stand on the tool to reach them.
To avoid injury or death from electrical shock:
, GROUND THE SAW. This saw has an approved 3 con-
ductor cord and a 3-prong grounding type plug. Use
........... grounded outlets rated 120 volts. 15
amperes (amps). The green conductor in the cord is the
grounding wire. To avoid electrocution, NEVER con-
nect the green wire to a live terminal.
• Make sure your fingers do not touch the plug's metal
prongs when plugging or unplugging the saw,
Before Each Use:
Inspect your saw.
DISCONNECT THE SAW. To avoid injury from acciden-
tal starting, unplug the saw, turn the switch "OFF" and
lock the switch before changing the setup or removing
covers, guards or blade.
_' i _ i_ _ ..... _i..... :
Loading ...
Loading ...
Loading ...