Loading ...
Loading ...
Loading ...
29
If still dirty, and in any case always at least once a month, clean
the coee lters thoroughly:
1. Extract the perforated lter by pulling the tab (g. 38).
38 39
2. Rinse the lters under
running water (g. 39).
3. Make sure the holes are
not blocked. If necessary,
clean with a pin (g.
39-40).
4. Dry all the components
with a cloth.
5. Put the perforated lter
back in the housing and
press as far as it will go
(g. 37).
13.5 Cleaning the boiler outlet
After every 200 coees, rinse the boiler outlet. Press the
rinse button (B4) and deliver about 200 ml of water.
13.6 Cleaning the water tank
1. Remove the lter (*if present) and rinse with running
water.
2.
Clean the water tank regularly (about once a month) and when-
ever you replace the water softener lter (C6) (*if present) with
a damp cloth and a little mild washing up liquid, then rinse
thoroughly.
3.
Replace the lter (*if present), ll the tank with fresh water
and replace the tank.
4. (Models with water softener lter only) Deliver about 100
ml of water.
Danger!
While cleaning, never immerse the coee maker in water. It is an
electrical appliance.
13.7 Cleaning the beans container
Without extracting it, clean the beans container regularly with
a cloth.
For more thorough cleaning, proceed as follows:
1. Make sure the beans container (A2) is empty. If necessary,
operate the coee mill without beans to empty it:
2. Release the beans container by turning it anticlockwise and
extract from the appliance.
3. Wash the container and
lid (A1) with warm water.
Do not wash the compo-
nents in a dishwater or
use washing up liquid! Dry
all accessories thoroughly
before using again.
4. Remove coee residues
(g. 41);
5. Clean the beans contain-
er housing with a damp
cloth and dry;
6. Put the container back as described in section "3. Setting
up the appliance".
13.8 Cleaning the burrs
When cleaning the beans container, clean the container housing
and upper burr with a damp cloth. The burr can be removed and re-
placed when worn. Contact an authorised customer services centre.
You may also need to remove the burr if it becomes blocked with
foreign matter. If this occurs, clean as follows:
1. Empty the beans container (if necessary, using a vacuum
cleaner to remove any remaining beans).
2. Attach the lter holder and operate the mill without beans
to free the coee guide, then attach the lter holder to the
outlet of the coee mill (A22), lining it up with "INSERT",
then turning it to the right (g. 18). Grinding begins when
the lter holder reaches the CLOSE position and stops
automatically;
3. Turn the appliance o;
4. Remove the beans container as described in the previous
section "13.7 Cleaning the beans container".
5. Turn the neness selector anticlockwise as far as it will go
to the "REMOVE" position (g. 42).
40
41
Loading ...
Loading ...
Loading ...