Loading ...
Loading ...
Loading ...
34
LIGHTS EXPLANATION OF LIGHTS OPERATION
+ ash briey at regular
intervals
The dial (B2) has been turned to the
maximum adjustment possible
When not enough coee is ground to reach
the correct quantity, select the new grinding
range as described in section "12.6 Extra
grinding adjustment".
ashing
The appliance is too hot to make coee Wait for it to cool
on
Descaling must be performed Descale the appliance as described in section
"14. Descaling"
ashing
Descaling is underway Complete the operation as described in sec-
tion "14. Descaling"
Descaling has ended and the dial (B8) is
in the "descaling" position
Turn the mode selector dial to one of the
"coee positions"
ashing quickly
The dial (B8) is in the descaling position Turn the dial to one of the beverage positions
on
The appliance is being turned on for the
rst time and the water circuit must be
lled
Proceed as described in section "3. Setting up
the appliance".
+ ashing
If the water softener lter (C6) is
present, an air bubble may have been
released inside the circuit, obstructing
delivery
Press the button (B6) corresponding to the
light (g. 9). Delivery begins and stops
automatically.
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the lter holder and repeat the op-
erations to make the coee, bearing in mind
the indications in section "4.5 Adjusting the
quantity of ground coee in the lter" and
table "16. How to make perfect coee".
ashing
The drip tray (A13) is missing or has not
been inserted correctly
Extract the drip tray then put back correctly
in the appliance
on
General alarm Contact Customer Services
…
→
Loading ...
Loading ...
Loading ...