Loading ...
Loading ...
Loading ...
25
Coee Pre-
infusion
Quantity Filter
✗
1 cup
70 ml
C3
C2
✗
2 cups
140 ml
C3
C2
✓
Always check that there is the right amount of coee in the lter
(see section "4.5 Adjusting the quantity of ground coee in the
lter").
• AMERICANO
Beverage of American origin, a long coee. Made by deliv-
ering an espresso, followed by hot water added directly to
the cup. Only one cup can be made at a time.
Coee Pre-
infusion
Quantity Filter
✓
1 cup
120 ml
C3
C2
✗
RECOMMENDED:
1 cup
240 ml
C3
C2
✓
Always check that there is the right amount of coee in the lter
(see section "4.5 Adjusting the quantity of ground coee in the
lter").
6. CUSTOMISING THE QUANTITY OF COFFEE
BEVERAGES WITH THE BUTTON (B7)
1. Prepare the appliance to deliver 1 or 2 cups of the coee
beverage you want to make, as far as attaching the lter
holder (C1) complete with the (C2) or (C3) lter and ground
coee.
2. Turn the dial (B8) to select the coee to be programmed.
3. Press the button: the light corresponding to the
button (B5) comes on steadily and the light corresponding
to the button ashes.
4. Press the button to start delivering the beverage. The
lights corresponding to the and buttons ash.
5. When you have reached the desired quantity of the bever-
age, press the button again.
6. Press the button to save the new setting. The appliance
is ready for use again and the button remains on.
If you do not want to save the new setting, press any other
button.
Programming Americano coee: follow the procedure described
above for the quantities of both coee and hot water.
Please note:
• You can programme coee beverages, but not steam and hot water.
• Programming changes the quantity of the beverages, but not the amount of
coee ground.
• "X2” beverages can be programmed separately.
6.1 Beverage reset
To reset the default beverage quantities, press and hold the
button (B7) until it goes o.
The selected beverage is reset to the default values.
7. USING PRE-GROUND COFFEE
1. Place the ground coee lter (C2) or (C3) in the lter holder
(C1) (g. 17);
2. Place the quantity of ground coee in the lter;
3. Turn the dial (B2) to the position to disable the coee
mill;
4. Attach the lter holder to the outlet of the coee mill
(A22), aligning it with "INSERT", then turning it to the right
(g. 10).
5. Pull the presser lever (A23) as far as it will go. The print-
ing on the lever indicates the pressing force exerted
( ) (g. 19).
6. Remove the lter holder by turning it towards the left.
8. DELIVERING HOT WATER
1. Choose the cup and place it on the correct cup grille ((A10)
or (A11)).
2. Press the button (B6): the appliance delivers hot
water from the spout (A5) then goes o automatically.
3. To interrupt delivery, press the button again.
9. HOW TO MAKE MILK-BASED BEVERAGES
1. Pour the quantity of milk you want to heat/froth into the
milk jug (C9), remembering that the volume of milk dou-
bles or triples in volume. For a denser more even froth,
you should ideally use skimmed or partially skimmed cow's
milk at refrigerator temperature (about 5°C).
2. Choose the position of the ring (A7) (g. 22) according to
the beverage to be prepared (see following table):
Loading ...
Loading ...
Loading ...