Loading ...
Loading ...
Loading ...
10.0AMP PLUNGE ROUTER 23
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore,
check the product using this section. In most cases the problem can be solved quickly.
WARNING: Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorised service centre
or a similarly qualified specialist if you cannot solve the problem yourself!
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The router does not work
Plug is not plugged into the
power source.
Plug the cord into the power
source.
The carbon brushes have
worn out completely.
Remove the brush caps, and
replace the old brushes with
new ones.
The router does not reach
full power
Extension cord not suitable
for operation with this
product
Use a proper extension cord
Power source (e.g.
generator) has too low
voltage
Connect to another power
source
Air vents are blocked Clean the air vents
The surface of the
workpiece is not smooth
after cutting
The bit is dull. Change to a sharp bit.
Routing at an inappropriate
bit speed
Select an appropriate bit
speed.
Loading ...