Loading ...
Loading ...
Loading ...
14 10.0AMP PLUNGE ROUTER
OPERATING INSTRUCTIONS
4.Deep cuts
Use the depth stop turret to change among
different depths without changing the depth
rod settings.
The most common use of this feature is
making successively deeper cuts to achieve
a final depth of cut that is too deep to
accomplish in a single pass. Each of the
steps progresses by 1/4" (6 mm) increments.
The 3 steps represent a total of 3/4" (18 mm)
with a full 360º rotation of the turret.
5. Switch on and off
The variable-speed control feature allows
the motor speed to be matched to the
cutter size and material hardness for an
improved finish and extended bit life.
The variable-speed dial is used to adjust
the speed of the router. Turn the dial to
increase or decrease the speed of the
tool. Position“1” selects the slowest
speed and position “6” selects the fastest
speed. Choose the applicable cutting
speed according the bit diameter and the
material being cut.
WARNING: It is recommended to select the desired speed before your operation, do
not change speed during operation.
1 6
5
4
Loading ...
Loading ...
Loading ...