Loading ...
Loading ...
Loading ...
10.0AMP PLUNGE ROUTER 13
OPERATING INSTRUCTIONS
3. Fine adjusting the depth of cut
The router is equipped with a fine
adjustment mechanism, which can be
used after the plunge lock has been set at
any plunge position and provides precise
adjustment of the router bit position for
unmatched accuracy.
a) To use the fine adjustment, turn
the fine adjustment knob clockwise
to lower the router bit or counter-
clockwise to raise it.
b) To allow precise settings, the fine
adjustment knob is graduated in
Imperial increments, each line is
equal to (1/256").
c) Each complete revolution of the fine
adjustment knob adjusts the plunging
depth by approximately 5/64". The
fine adjustment mechanism has
a total adjustment range of 1/2",
which is restrained between the two
indicating arrows on the back of the
housing.
NOTE: Whenever the fine adjustment is used,
be certain that the index marker (on the
back of the housing) is positioned between
the two indicating arrows to ensure enough
travel in the desired direction after the router
is plunged into position.
NOTE: When the router is plunged to maximum depth or is fully retracted to the top of the
plunge position, the fine adjustment knob cannot move the motor further down or up, as
the full extension of travel has been reached. Similarly, the fine adjustment knob cannot
lower the bit when the depth rod is tightened against the depth turret.
NOTE: To be certain that your depth settings are as desired, you may want to make test
cuts in scrap material before beginning work.
+
-
3a
3b
Loading ...
Loading ...
Loading ...