Loading ...
Loading ...
Loading ...
12
MAINTENANCE
To avoid possible electric shock, ensure to turn the dehumidifier off and
disconnect the plug from the power source before performing any cleaning or
maintenance.
1. Cleaning the Dehumidifier
Clean the dehumidifier housing with a soft damp cloth. Do not submerge or place
water on the dehumidifier or control panel. Water may damage the electronic
components of the dehumidifier. Do not use chemical solvents such as benzene,
alcohol, gasoline or other heavy-duty cleaners. The surface may become damaged or
deformed.
2. Cleaning the Air Filter
The working performance of the dehumidifier will be greatly reduced if the filter
becomes blocked. The air filter should be cleaned approximately every 2 weeks and
may require more frequent cleaning if there is significant dander or fur in the air. The
air filter is located behind the inlet grill.
Follow the steps below to clean the filter:
·Unscrew the hand screw on the top of the inlet grill, open the inlet grill and take the
filter out.
·Use a vacuum cleaner with a soft brush attachment to remove any large debris or
dust build-up from the filter.
·Wash the filter in lukewarm, soapy water, below 40°C (104°F), or use a neutral
cleaning agent.
·Rinse the filter with clean water and dry thoroughly.
·Re-install the filter.
NOTE: DO NOT operate the dehumidifier without a filter because dirt and lint will clog
it, hence reducing performance.
Loading ...
Loading ...
Loading ...