Loading ...
Loading ...
Loading ...
9
Note:
·Before entering the AUTO ON TIMER setting, make sure power is being supplied to
the dehumidifier.
·For the AUTO ON setting, please turn on the dehumidifier to select a desired
humidity level.
Otherwise, the humidity maintained will be the same as the previous setting.
·You can only set AUTO ON timer when the dehumidifier is off or set AUTO OFF timer
when the dehumidifier is on, but not be able to set both AUTO ON and AUTO OFF
timer at the same time.
·The TIMER will ONLY function one time instead of cycling the dehumidifier on or off
indefinitely.
·The TIMER function will be disabled when the dehumidifier has been powered on/off
manually.
·Set the timer as 00, the timer function will not be activated.
7. Connect the Dehumidifier to an External Pump to Drain
Make sure your dehumidifier is turned off and unplugged before the
following operations:
Run the drain hose from the Gravity Drain Outlet down into the external pump (The
drain hose nor the external pump can be above the Gravity Drain Outlet).
NOTE:
·If the pump has a water full signal cable, connect it to the External Pump Terminal on
the dehumidifier, then the dehumidifier will auto stop when the pump is full to avoid
leakage. However, connecting a water full signal cable is not a must for using an
external pump to drain.
·Not all the output signal of the external pump compatible with this dehumidifier.
If the external pump output signal compatible with our dehumidifier
When the pump is full, the dehumidifier stops working and displays E5 and the
Loading ...
Loading ...
Loading ...