Loading ...
Loading ...
Loading ...
43
www.johnnygspiritbike.com
LAP PROGRAM: Summary displays time and distance for each lap.
• LAP 1, LAP 2, LAP 3, LAP 4, LAP 5 Time and Distance.
• If no laps were recorded this screen will not display.
• Only the last 5 laps will display on separate screens, if recorded.
If USER is selected:
The User function adds another program to run concurrently. The console is capable of
running All three programs at the same time. The User feature is used to accomplish this.
Once leaving the Warm Up Mode, if the Play Key is pressed for 3 seconds while in any
program, END RIDE or USER will display; from there any program can be ended or
started.
• Press Play Key and if HR is paired then DISCONNECT HR will display.
• Press + Key to scroll through programs: POWER ZONE, LAP.
• Use the + Key and Play Key to activate or disable each of the programs.
• Refer to each of the programs pages for instructions.
NOTE: Because USER function is activated after leaving Warm Up Mode, programs
will not start with a Warm Up. HR can ONLY be paired during Warm Up Mode. If HR
is not already paired, then USER function cannot activate HR. Console reset is required.
• Power Zone: USER function can turn ON or OFF program.
• FTP Test: USER function can be used to access and run FTP tests inside the Power Zone progam.
• LAP Program: USER function can enable or disable program.
• Reset the console by pressing simultaneously and holding + Key and Play Key for 3 seconds.
This action will revert to Warm Up Mode.
Loading ...
Loading ...
Loading ...