Loading ...
Loading ...
Loading ...
23
www.johnnygspiritbike.com
JOHNNY G SPIRIT BIKE STEP FOUR
1. Thread ADJUSTING AXLE (58) through hole into
HANDLEBAR ANCHOR (51) with TWO FLAT
WASHERS (121). Tighten fully, using LEVER (67) as a
tool if necessary. NOTE: Gently pull on MAIN WIRE
(90) allowing space for insertion of ADJUSTING AXLE
(58) to prevent cable damage.
2. Insert a small Allen wrench into lever from bottom to
remove plastic cap at top of lever allowing access for
bolt installation
3. Install LEVER (67) in a 12 o’clock position. Attach
LEVER (67) to ADJUSTING AXLE (58) using
BUTTON HEAD SOCKET BOLT (149) using 4MM
ALLEN WRENCH (155).
4. Install plastic cap to seal lever.
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
58 ADJUSTING AXLE 1
67 SOCKET HEAD CAP BOLT M3×P0.5×10L 1
121 FLAT WASHER Ø1/4" × 13 × 1.0T 2
149 BUTTON HEAD SOCKET BOLT M6 x 10L 1
Loading ...
Loading ...
Loading ...