Loading ...
Loading ...
Loading ...
6. Select the first field to open a keypad. Enter the correct digits for the field, and then press the OK
button.
7. Repeat the process for each field, and then press the OK button.
Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1.
On the product control panel, press the Home
button.
2. To enable manual configuration, open the following menus:
●
Administration
●
Network Settings
●
Jetdirect Menu
●
TCP/IP
●
IPV6 Settings
●
Address
●
Manual Settings
●
Enable
Select the On option, and then press the OK button.
3. Select the Address option, and then press the OK button to open a keypad.
4. Use the keypad to enter the address.
5. Press the OK button.
ENWW
Configure IP network settings
111
Loading ...
Loading ...
Loading ...