Loading ...
Loading ...
Loading ...
5
www.spirittness.com
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Do not modify the plug provided with the product if it
will not t the outlet; have a proper outlet installed by a
qualied electrician.
• Remove tether cord after use to prevent unauthorized
treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT ELECTRICAL
INSTRUCTIONS
WARNING
NEVER use a RCD - Residual Current Device (U.S.
ver.= GFCI) - wall outlet with this treadmill. As with
any appliance with a large motor, the RCD/GFCI
will trip often. Route the main power cord away
from any moving part of the treadmill including the
elevation mechanism and transport wheels.
NEVER remove any cover without rst disconnecting
AC power. If voltage varies by ten percent (10%)
or more, the performance of your treadmill may be
affected. Such conditions are not covered
under your warranty. If you suspect the voltage
is low, contact your local power company or a
licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture.
This product is NOT designed for use outdoors,
near a pool or spa, or in any other high
humidity environment. The operating temperature
specication is 40 to 120 degrees Fahrenheit, and
humidity is 95% non-condensing (no water drops
forming on surfaces).
Circuit Breakers: Some circuit breakers used in
homes are not rated for high inrush currents that
can occur when a treadmill is rst turned on or
even during use. If your treadmill is tripping the
house circuit breaker (even though it is the proper
current rating) but the circuit breaker on the treadmill
itself does not trip, you will need to replace the
home breaker with a high inrush type. This is not
a warranty defect. This is a condition we as a
manufacturer have no ability to control. This part is
available through most electrical supply stores.
Loading ...
Loading ...
Loading ...