Loading ...
Loading ...
Loading ...
Figure 7
Once you have made all of the connections, carefully turn the
water supply on and check for leaks.
Ensure that the new water inlet hoses are not trapped, kinked,
twisted, folded or crushed.
NOTE: Your Washing Machine must only be connected to your
water supply using the supplied new fill hose. Old hoses must
not be reused.
3.
4.
• If your machine has a hot water inlet connection, the
temperature of the hot water supply should not be higher
than 158°F.
~37.5” (95 cm)
~60.0” (152 cm)
~57” (145 cm)
~55.0” (140 cm)
~37.5” (95 cm)
~37.5” (95 cm)
~39.5” (100 cm)
WATER DISCHARGE CONNECTION
• Connect the water drain hose to a standpipe or to the outlet
elbow of a household sink, using additional equipment.
• Never attempt to extend the water drain hose.
• DO NOT put the water drain hose from your machine into a
container, bucket or bathtub.
• Make sure that the water drain hose is not bent, buckled, crushed
or extended.
• The water drain hose must be installed at a maximum height of
39.5” (100 cm) from the ground.
Figure 8
12
Figure 9
Loading ...
Loading ...
Loading ...