MAGIC MCSFLW24W1 2.2 cu. ft. Front Load Washer, 24 in

Use and Care Manual - Page 11

For MCSFLW24W1.

PDF File Manual, 24 pages, Read Online | Download pdf file

MCSFLW24W1 photo
Loading ...
Loading ...
Loading ...
11
Figure 6
ELECTRICAL CONNECTION
The washing machine requires a 110-120 V ~/60Hz main power
supply.
The power cord is with an grounded plug that should always
be inserted to an grounded socket on a 10 amp circuit
If connected to a fuse protected circuit, use time-delay fuses
with this appliance.
If you do not have a suitable socket and fuse, contact a qualified
electrician.
We do not take responsibility for damage that occurs due to the use of ungrounded equipment.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least resistance for electric current. This appliance is
equipped with a cord that has an equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service tech if you are in doubt as to whether the appliance is
properly grounded.
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
NOTE: Operating your machine with low voltage will cause the life cycle of your machine to be reduced
and its performance to be restricted.
WATER INLET CONNECTION
1. The washing machine has a double water inlet connection for
both hot and cold) connections. The red capped hose should be
connected to the hot water inlet, and the white capped hose
should be connected to the cold water inlet.
2. Connect the water inlet hoses to a 3/4" threaded tap.
Connect the white capped end of the water inlet hose to
the white water inlet valve on the rear side of the machine
and the red capped end of the hose to the red water inlet
valve (if applicable).
Hand tighten the connections. If in any doubt, consult a
qualified plumber.
Water flow with pressure of 0. 1-1 Mpa will allow your
machine to operate at optimum efficiency (pressure of 0.1
Mpa means that more than 8 liters of water per minute will
flow through a fully opened tap).
Figure 6
3/4”
10 mm
Loading ...
Loading ...
Loading ...