Loading ...
Loading ...
Loading ...
10
INSTALLATION INSTRUCTIONS
REMOVING THE TRANSIT BOLTS
1. Before operating the washing machine, you must
remove the 4 transit bolts and rubber spacers from
the rear of the machine. If the bolts are not removed,
they may cause heavy vibration, noise and
malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise.
3. Remove the transit bolts by pulling them straight out
from the holes.
4. Fit the plastic caps supplied in the accessories bag
into the gaps left by the removal of the transit bolts.
The transit bolts should be stored for future use.
NOTE: Remove the transit bolts before using the machine
for the first time. Faults occurring due to the machine being
operated with transit bolts fitted are out of the scope of the
warranty.
X4
Figure 4
ADJUSTING THE LEVELING FEET
Figure 5
1. Do not install your machine on a surface (such as
carpet) that would prevent ventilation at the base.
• To ensure silent and vibration-free operation
of your machine, install it on a firm surface.
• You can level your machine using the adjustable
feet.
2. Loosen the plastic locking nut.
3. To increase the height of the machine, turn the feet
clockwise. To decrease the height of the machine, turn
the feet anticlockwise.
4. Once the machine is level, tighten the locking nuts by turning them clockwise.
• Use a bubble level to verify the washer is leveled.
• Never insert cardboard, wood or similar materials under the machine to level it.
• When cleaning around or moving the washer, take care not to disturb the level of the machine..
X4
Loading ...
Loading ...
Loading ...