Loading ...
Loading ...
Loading ...
TimedDry
Use this cycle to get up to 60 minutes of heated drying time or to
complete drying if items are still damp after the automatic cycle.
Timed Dry is also useful for:
a Heavyweight items and work clothes that require a long
drying time.
a Lightweight items, such as lingerie, blouses and knits that
require a short drying time,
See following table for recommended cycles and temperature
settings.
Fabric Type Time Temperature
(minutes) Setting
Heavy cottons and denims 60 Normal
Cottons and linens 40 Normal
White and colorfast 40 Low
permanent press
White and colorfast items 40 Low
that require ironing
Polyester/ecrylic blends, 40 Low
rayon, acetate
Washable silk and nylon 40 Low
End of Cycle Signal
The dryer sounds a signal to let you know when the cycle is
finished, The signal is not adjustable and cannot be turned off,
The signal is helpful when you are drying permanent press,
synthetics, and other items that should be taken out as soon as
the dryer stops,
Anti-Wrinkle
Anti-Wrinkle helps prevent wrinkles that form when clothes are
net removed promptly at the end of a cycle. Anti-Wrinkle tumbles
the load every minute until the cycle knob is set to the Stop
position or the dryer door is opened.
During Anti-Wrinkle, the End of Cycle Signal will sound until the
cycle knob is set to the Stop position or the dryer door isopened.
TemperatureControl
N_,ml _ _ TEMPERATURE
unv_
Temperature Control Button
The Temperature Control button letsyou select between a normal
and low drying temperature.
NOTE: Always referto the care label on the garment to determine
whether it can be tumble dried.
Normal
The Normal temperature setting is for sturdy fabrics, such as
cotton, linen and denim. If the Temperature Control button is not
pressed in, the temperature setting is Normal.
Low
The Low setting isfor synthetics, such as cotton/polyeeter blend,
rayon, acetate, washable silk or nylon. If the Temperature Control
button is pressed in, the temperature setting is Low.
DRYERCARE
CleaningtheDryerLocation
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
Explosion Hazard
Keep flammable materials and vapors, such as
geaollne, away from dryer,
Place dryer at least 18 Inches (46 cm) above the floor
for a garage Installation,
Fallura to do so can result In death, explosion, or flra,
Cleaningthe LintScreen
Every load cleaning
The lintscreen is located inthe door opening of the dryer, Clean it
before each load, A screen blocked by lint can increase drying
time,
To clean
1. Open the door and pull the lint screen straight up.
J
2. Open lint screen.
3. Roll lint off the screen with your fingers. Do not rinse or wash
screen to remove lint. Wet lint is hard to remove.
4. Close lint screen. Push the lint screen firmly back into place
and close the door.
15
Loading ...
Loading ...
Loading ...