Whirlpool LEW0050PQ0 Official Dryer

User Manual - Page 14

For LEW0050PQ0.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ChangingCyclesandTemperatures
To change the cycle or temperature after pressing START
1. Open the dryer door.
2. Press the TEMPERATURE button to change the temperature
(if desired).
3. Turn the cycle knob to the new desired position.
4. After the beep sounds, press the START button.
Drying,Cycle,andTemperatureTips
Select the correct cycle and temperature for your load.
Your dryer tumblss the load without heat during the last few
minutes of all cycles to make the load easier to handle and to
reduce wrinkling. After the cool-down cycle ends, the light
flashes and an end-of-cycle signal sounds to indicate the cycle is
complete.
Drying tips
Follow care label directions when they are available.
Remove the load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
Avoid drying heavy work clothes with lighter fabrics. This
could cause overdrying of lighter fabrics, leading to increased
shrinkage or wrinkling.
Cycle and temperature tips
Drymostloadsusinganautomatic cycle.
Line dry bonded or laminated fabrics.
NOTE: Ifyou have questions about drying temperatures for
various loads, refer to the care label directions.
11MEDDRY
(minutes)
Cycles
Stop
_GU_R
40 Normal
5O LessDry
_mpD_
_ssD_
Normal
_HTH_I_
CycleCon_rol_ob
Automatic Cycles
Automatic cycles may be used for most loads. Automatic cycles
give the best drying results in the shortest time. Drying time
varies according to the type of fabric, size of the load, and
dryness setting.
After drying a load, check the dryness.
Ifthe load is drier than you like, select a setting closer to Less
Dry the next time you dry a similar load.
If a load is not as dry as you like, complete drying using a
Timed cycle. Select asetting clcser to More Drythe next time
you dry a similar load.
See following table for recommended cycles and temperature
settings.
Fabric Type Cycle Temperature
Setting
REGULAR
Heavy cottons and demine More Dry Normal
Cottons and linens Normal Normal
SYNTHETICS
White and colorfast Normal Low
permanent press
White and colorfast items Less Dry Low
that require ironing
Polyeater/ecrylic blends, Damp Dry Low
rayon, acetate
Washable silk and nylon Damp Dry Low
14
Loading ...
Loading ...
Loading ...