Loading ...
Loading ...
Loading ...
5
•Location of the water supply (refer to niche diagram).
•Water system of the refrigerator must be connected to
the potable water main in the house with a valve that is
accessible in an adjacent cabinet, so that it is
accessible after installation.
•Supplied water pressure should be between 25-80 psi
(1.7-5.5 Bar) for proper function of ice maker and water
dispenser.
•Water pressure from RO systems are typically
insufficient for proper function of the ice maker.
•Install a pressure limiting device if the water pressure
exceeds 80 psi.
•Inspect all water connections for leaks. Water leaks
can cause excessive damage over time.
•It is recommended to us a ¼” supply line with a min
length of 60" (1.5 m) with a threaded ¼” female
connector end.
•Before completing the installation turn water on to
ensure water is flowing, and there are no leaks.
3.7 Water Connection (where applicable)
23-5/8" (600mm)
Water
Supply
4" (102mm)
30" (762mm)
Plug
2" (50.8mm)
* Water supply: Applicable to ice maker models only
* Electrical: Power cord length: 86.6" (2200mm)
11" (280mm)
Loading ...
Loading ...
Loading ...