Loading ...
Loading ...
Loading ...
12
7.3 Adjusting the height of the
refrigerator in the niche
•Use the adjustable leg mechanism to raise, lower and
level the unit in the niche as per the diagram below
•After adjusting the adjustable feet, check for level in
both width and depth directions by placing a level in
the freezer cavity floor (drawer should be removed for
this)
WARNING
Once the unit is pushed into the niche lower the front legs
first to reduce the risk of unit tipping forward during the
height adjustment process.
The maximum travel for the adjustable feet is 1 9/16" (40
mm).
7.4 Adjusting the refrigerator according
to the cabinet niche
•For products with supplied stainless panel doors, the
position of the unit is adjusted so that the door and the
furniture surface are flush and ensuring a min 1/8” gap
from panels and gables.
•For units with custom cabinet overlay panels, the unit
should be installed at a depth considering the overlay
panel thickness to ensure a flush installation or as
desired by the end user
•
IMPORTANT: It is important to align the upper edge of
the freezer drawer when aligning as this height and
position is fixed. The other panels can be adjusted with
the adjustment mechanisms within the mounting
hardware. As shown below an install depth template
tool is provided as a convenience
•Position of the level adjustment part (#10) must be
adjusted according to the thickness of the door. It can
adjust the level for 4 different door thickness.
Loading ...
Loading ...
Loading ...