Loading ...
Loading ...
Loading ...
9.Hinge Adjustment and Reversing the Door Swing
WARNING
Failure to set the hinge to "0" and continuing the
installation like that may cause injury.
•Take out the upper door and lay it down on a
table remove the fixing parts and screw them to
the opposite side of the door.
•Remove the door/hinge mounting angle brackets
and move to opposite side. Attach the door/hinge
mounting brackets using the same two screws.
•Set the tension level of the hinge to "0”.
23
9.1 Adjusting the spring tension of the hinge
IMPORTANT
•The door must be fully open during this adjustment.
•The hinge tension adjustment must be performed only
after the door panel has been adjusted.
•
Use a hand tool to adjust the tension of the upper and
lower hinges of the upper door. Set the hinge
adjustment screw to position "I" from position "O".
15
Loading ...
Loading ...
Loading ...