Hikvision DS-2CD2D25G1/M-D/NF 4MM User Manual

Loading ...

Figure 6-7 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

6.2.8 Set Object Removal Detecon

It detects whether the objects are removed from the pre-dened detecon region, such as the

exhibits on display. If it occurs, the device can take linkage acons and the sta can take measures

to reduce property loss.

Steps

Go to Conguraon → Event → Smart Event → Object Removal Detecon .

Check Enable.

Select a Region. For the region sengs, see

Draw Area .

Set the rule.

Sensivity It stands for the percentage of the body part of an acceptable target that leaves

the pre-dened region.

Sensivity = 100 – S1/ST*100

S1 stands for the target body part that leaves the pre-dened region. ST stands

for the complete target body.

Example: If you set the value as 60, a target is possible to be counted as a

removed object only when 40 percent body part of the target leaves the region.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2D25G1/M-D/NF 4MM 2MP Network Covert Camera 4mm Lens