Loading ...
Loading ...
Loading ...
Figure 6-6 Set Rule
5.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
7.
Click Save.
6.2.7 Set Region Exing Detecon
It is used to detect objects exing from a pre-dened virtual region. If it occurs, the device can take
linkage acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Region Exing Detecon
2.
Check Enable.
3.
Select one Region. For the detecon region sengs, refer to
Draw Area .
4.
Set sensivity.
Sensivity It stands for the percentage of the body part of an acceptable target that goes
across the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for the
target body part that goes across the pre-dened region. ST stands for the
complete target body. The higher the value of sensivity is, the more easily the
alarm can be triggered.
Network Camera User Manual
38
Loading ...
Loading ...
Loading ...