Hikvision DS-2CD2D25G1/M-D/NF 4MM User Manual

Loading ...

Steps

Go to Conguraon → Event → Smart Event → Intrusion Detecon .

Check Enable.

Select a Region. For the detecon region sengs, refer to Draw Area .

Set rules.

Sensivity Sensivity stands for the percentage of the body part of an acceptable target

that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for

the target body part that goes across the pre-dened region. ST stands for the

complete target body. The higher the value of sensivity is, the more easily the

alarm can be triggered.

Threshold Threshold stands for the threshold for the me of the object loitering in the

region. If the me that one object stays exceeds the threshold, the alarm is

triggered. The larger the value of the threshold is, the longer the alarm triggering

me is.

Figure 6-4 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2D25G1/M-D/NF 4MM 2MP Network Covert Camera 4mm Lens