Kenmore 79046612501 Elite electric range

User Manual - Page 9

For 79046612501.

PDF File Manual, 46 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Setting Surface Controls @ont'd)
The E_ectronic Surface E_ement Contro_ (ESEC)
The Electronic Surface Element Control (ESEC) feature provides a digital display
of the radiant surface elements on the cooktop. The ESEC display in combination
with the touch pads are designed to replace conventional control knobs.
The available ESEC Window Display Settings
The ESEC control will display heat levels ranging from Hi (Figure 1) to Lo (Figure
6) and OFF (Figure 7). The settings between 9.0 (Figure 2) and 3.0 (Figure 8)
decrease or increase in increments of .5 (1/2). The settings between 3.0 (Figures 8
& 4) and 1.0 (Figure 5) are Simmer settings which decrease or increase in
increments of .2 (1/5) to Lo (Figure 6; lowest Simmer setting) for more precise
settings at lower heat levels. Use the Recommended Surface Setting Chart (See
Figure 12) to determine the correct setting for the kind of food you are preparing.
Hot Surface mndicator Lights
After using any of the radiant element positions the cooktop wiii become very hot.
After turning any of these elements OFF, the cooktop will remain HOT for some
time. The "Not Surface" indicator light located on the glass cooktop wiii glow
whenever any of the element positions become HOT. The Not Surface indicator
light wiii remain ON while hot and turn OFF once the cooktop has cooled
sufficiently.
ESEC Lockout Feature ( - - )
The ESEC feature will not operate during a Self-Clean cycle or when the Cooktop
Lockout feature is active. Whenever the Cooktop Lockout feature is active, " - - "
wiii appear in any display window (See Figure 8).
ESEC PF message
The ESEC wiii display the PF message (Figure 9) whenever there has been a
power interruption to the appliance. To clear the PF message touch any ON/OFF
ESEC control pad to reset and be sure to reset the clock with the correct time of
day if necessary, if the PF displays again repeat these steps.
Recommended Surface Cooking Settings
Figure 1
Figure 3
Figure 5
Figure 8
Figure 7
....................................................................... i!
Recommended Settings for Singte, Bridge & Triple Surface Elements
Setting Type of Cooking
HiGH (8.0 - Hi) Start most foods, bring water to a boil or pan broiling
MEDIUM HiGH (5.0 - 8.0)
MEDIUM (3.0 - 5.0)
MEDIUM LOW (2.0 - 4.0)
LOW/SiMMER (Lo - 2.0)
Continue a rapid boil, fry, deep fat fry
Maintain a slow boil, thicken sauces and gravies, steam vegetables
Keep foods cooking, poach, stew (2.8 or lower is a simmer setting).
Keep warm, melt, simmer (2.8 or lower is a simmer setting).
Note: The size and type of cookware used wiii influence the setting needed for best cooking results, The
Simmer settings are used to simmer and keep larger quantities of foods warm such as stews and soups,
The lower Simmer settings are ideal for delicate foods and melting chocolate or butter,
Figure 2
Figure 4
Figure 6
Figure 9
3:::11:
Loading ...
Loading ...
Loading ...