Loading ...
Loading ...
Loading ...
User's Manual
67
Figure 4-67 Radar configuration (single lane)
2) Configure radar parameters.
Table 4-41 Radar parameters
Parameter Description
Enabled Lanes The number of lanes on which the radar has been enabled.
Working Mode
Select the work mode of the radar from
Speed Measurement
,
Calculation Mode
,
Send Beams by Vehicles
,
Send Continuous
Beams
and
Manually Send Beams
.
Starts Monitoring from
Lane
The lane number on which the radar starts detecting.
Distinguish Target
Intervals
During the interval, the radar only detects one object.
This function works together with a special program.
Detection Direction The direction of radar detection.
Speed to Trigger
Snapshot
The low speed limit that triggers the radar to send a capture signal to
the Camera. Once the vehicle exceeds the limit, the Camera takes a
snapshot.
Wait Time Before
Capture
During the speed wait, if the Camera reads the speed from the radar, it
is the vehicle speed; Otherwise, the displayed vehicle speed is a
random value within the speed limit.
Wait Time After
Capture
Angle The angle between the radar beam and vehicle driving direction.
Sensitivity
Supports adjusting the sensitivity of the radar capture. 5 is the most
sensitive.
3) Select
RS-485
to enable multi-lane radar detection.
Loading ...
Loading ...
Loading ...