Loading ...
Loading ...
Loading ...
User's Manual
55
Figure 4-53 Lane config
Click to select a lane and then all configurations on the
Violation Snapshot
are for this
lane.
Table 4-33 Lane config parameters (2)
Parameter Description
Lane Direction
The arrow direction of the lane line needs to be the same as that of
the travelling vehicle.
●
Vehicle Tail
: Lane line arrow is upward.
●
Vehicle Head
: Lane line arrow is downward.
Edit Line
Select the checkbox to enable the function, and then you can adjust
the lane lines by dragging the corners on the image.
Step 3 Configure lane parameters.
Step 4 Click a line type, and then draw the lane lines on the image.
To clear the lane lines or regions that you have drawn, click .
Table 4-34 Lane line parameters (2)
Parameter Description
Lane Line
Each lane needs to have two lane lines, shown as blue lines with arrows
indicating the direction in which the vehicles travel.
The drawn lines should go along the actual lane line.
Detection Line The line that will trigger vehicle capture if reached. The detect line is red.
Auto Drawing
Install the plug-in before using the
Auto Drawing
function.
Click
Auto Drawing
, and then the system automatically draws lane lines.
You can adjust the auto lines as needed.
Step 5 Click to select and show a lane on the video image.
Step 6 Click
Save
.
Vehicle Detection
Procedure
Step 1 Select
Setting
>
Event
>
ANPR Snapshot
>
Violation Snapshot
.
Step 2 In the
Vehicle Detection
section, click the line or region type, and then draw on the video
Loading ...
Loading ...
Loading ...