Loading ...
Loading ...
Loading ...
User's Manual
12
4.2.7 Vehicle Snapshot
Select
Picture Preview
, and then snapshots will be displayed when vehicles pass.
4.2.8 Event List
Select
Picture Preview
, and the event information will be displayed, including number, event types,
capture time, lanes, plates, vehicle color, speed, vehicle signs, and vehicle types.
4.3 Viewing Radar & Video Integration
Background Information
View the integrated data of the Camera video and radar detection results on one page.
Procedure
Step 1 Click
Radar & Video Integration
.
Step 2 On the left side, click icons at the lower-left corner to view vehicle details on the image.
●
Click to enable radar & video integration, and then the target ID, distance and
travelling speed are displayed on the image.
●
Click to display the radar targets.
●
Click to display the video targets.
●
Click to display the video image in full screen. Double-click or press Esc to exit the
full screen.
Step 3 Adjust the radar detection.
●
Click
On
or
Close
next to
Target Trajectory
to display or hide the target trajectory.
●
Different types of targets, such as Non-motor vehicles, pedestrians, large, middle and
small vehicles, can be displayed in different icons respectively.
Step 4 Click
Picture Preview
at the upper-right corner, and then the metadata obtained after the
radar & video integration are displayed on the list.
4.4 Radar Configuration
Configure the radar to accurately capture events during bad weathers and poor light conditions.
4.4.1 Radar Settings
4.4.1.1 Calibrating by Radar & Video
Calibrate the radar. Make sure when the radar sends signals to the camera, the camera can capture
the right target.
Procedure
Step 1 Select
Radar
>
Radar Settings
.
Step 2 Click
Calibrate by Radar & Video
.
Step 3 Select a channel on the prompted page, and then select the
Splicing Calibration
Loading ...
Loading ...
Loading ...