Loading ...
Loading ...
Loading ...
User's Manual
4
Click the icon to view details.
Step 5 Click
Finish
.
3.2 Changing IP Address
Background Information
You can acquire and change the IP address of devices accessed through wired network. This section
uses changing IP address with the ConfigTool as the example.
Procedure
Step 1 Start the ConfigTool.
Step 2 Click
Modify IP
.
Step 3 Select the device(s) whose IP need(s) to be changed.
●
Change one IP address: Click
Edit
corresponding to the device.
●
Change IP addresses in batches: Select the devices, and then click
Batch Modify IP
.
Step 4 Set mode, IP, subnet mask and gateway.
Step 5 Click
Confirm
.
3.3 Upgrading the Camera
Background Information
Single upgrade and batch upgrade are supported.
Procedure
Step 1 Start the ConfigTool.
Step 2 Click
Device Upgrade
.
Step 3 Select the Camera to be updated.
●
Update one by one: Click corresponding to the Camera.
●
Update in batches: Select multiple devices, and then click
Batch Upgrade
.
Step 4 Select the update file.
Step 5 Update the Camera.
●
Update one by one: Click to start updating.
●
Update in batches: Click
OK
to start updating.
During update, if the Camera is disconnected, as long as the ConfigTool stays on the
update page, the upgrade will continue when the Camera is reconnected.
3.4 Logging in to Web
On the
Modify IP
page, click
Web
corresponding to the Camera, and then you are directed to the
login page of the web client. Enter the login username and password to log in.
Loading ...
Loading ...
Loading ...