Loading ...
Loading ...
Loading ...
User's Manual
66
4.7.7 Peripheral
4.7.7.1 Device Status
Select
Setting
>
Peripheral
>
Peripheral
>
Device Status
, and then you can view the information
related to the external device.
4.7.7.2 Serial Port
This section displays all serial ports of the Camera, and integrates all devices which can be connected
so you can configure them on one page. At present, the Camera supports configuring radar,
positioning method, external light and transparency serial.
Procedure
Step 1 Select
Setting
>
Peripheral
>
Peripheral
>
Serial Port
.
Step 2 Configure external devices.
Figure 4-66 Serial port settings
●
One serial port can only enable one external device.
●
RS-485 and RS-232 ports are supported.
◇
RS-232 port can enable radar for single lane, and RS-485 enables radar for multiple
lanes.
◇
You cannot enable single lane and multiple lanes at the same time.
●
Only one external device can be enabled for one port at the same time.
●
Radar
1) Select
Radar
.
Loading ...
Loading ...
Loading ...