Loading ...
Loading ...
Loading ...
User's Manual
34
monitoring, and configuration of the parameters of the Device.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Register
.
Step 2 Select
Enable
to enable automatic registration, and then enter the address, port, and sub-
device ID.
Table 4-19 Auto register parameters
Parameter Description
Address Server IP address or server domain that you want to register to.
Port Port of the server for auto register.
Sub-Device ID
ID of the automatically registered device assigned by the server.
Ensure that the ID of the automatically connected device is unique during
configuration.
Step 3 Click
Save
.
4.7.2.4 Multicast
When multiple users preview the video of the same device, unavailability might happen due to
network bandwidth restriction. You can fix it by setting up a multicast IP (224.0.0.0–239.255.255.255)
to access videos through the multicast protocol.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Multicast
.
Step 2 Select the checkbox of
Enable
to enable the function.
Step 3 Enable main stream or sub stream based on the actual situation and set IP address and
port number.
Step 4 Click
Save
.
4.7.2.5 P2P
If enabled, the camera can be added to other platforms through P2P.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Platform Access
>
P2P
.
Step 2 Select the checkbox of
Enable
.
Step 3 Click
Save
.
You can add the camera to other platforms using its serial number or by scanning its QR
code.
4.7.2.6 Routing Settings
The Camera supports configuring routings for dual NICs, and accessing gateways of target network
segments.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Routing Settings
.
Step 2 Select Ethernet card and enter IP segment, subnet mask and default gateway.
Step 3 Click
Add
, and then
Save Succeeded
appears at the bottom and the routing is added to
Loading ...
Loading ...
Loading ...