Loading ...
Loading ...
Loading ...
User's Manual
36
4.7.3 Remote Device
Background Information
Remote device (such as enforcement camera or IP camera) information will be displayed on the
Add
Camera
page if any of such devices is in use. You can enable the remote device to work with the
Camera to capture events. Currently, only events of crossing the stop line and running a red light can
be captured by combining the Camera and remote device.
This function is available only in
E-Police
mode.
Procedure
Step 1 Select
Setting
>
Add Camera
>
Remote Config
.
Step 2 Set the delay time for sub camera in
Snapshot Delay Time for Sub Camera
.
Step 3 Select a remote device, and then click .
Step 4 Select
On
to enable using the remote device, and modify other device information such as
name, IP address, login username, and password.
Step 5 Select
Linkage Snapshot
to enable snapshot by the Camera.
If a storage device is used, the snapshots captured by the Camera and the remote device
will be composited, and saved to the storage device. If no, the snapshots will be saved to
the storage path defined on the web page of each device.
Step 6 Click
Save
.
Figure 4-31 Add camera
4.7.4 Event
You can configure how the Camera responds when alarms or abnormal events occur.
Loading ...
Loading ...
Loading ...