Loading ...
Loading ...
Installation
[] RECONNECTING GAS
Listed connector ANSI Z21.24 /CSA 6.10
118" NPT PIPE
NEW METAL PLUG FOR GAS
FLEXIBLEGAS INLET PRESSURE
LINECONNECTOR
ADAPTER
ELBOW 3/8" NPT
SHUT-OFF
PIPESIZE
ITEMSNOT SUPPLIED --AT LEAST I/2"
Note: The connector and fittings are designed for use only
on the original instaUation and are not to be reused for
another appUance or at another tocation, Keep flare end of
adaptor free of grease, oil and thread seal.ant,
Caution: Use adapters as shown. Connector nuts must not
be connected direcNy to pipe threads.
APPLYPIPECOMPOUND
TOTHEADAPTERAND
DRYERGASINLET.
\
TIGHTEN THE FLEXIBLE
GASLINE USING TWO
ADJUSTABLEWRENCHES.
Instructions
APPLYPIPECOMPOUND
TOALL MALETHREADS.
3
©
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!
[] LEAK TEST
,_ WARNING - NEVER USE AN OPEN
FLAME TO TEST FOR GAS LEAKS.
OPEN
GASVALVE,
Check all connections for leaks with soapy solution or equivalent.
Apply soap solution. Leak test solution must not contain ammo-
nia which could ceuse damage to the brass fittings. If leaks are
found, close valve, retighten the joint, and repeat the soap tesL
Loading ...
Loading ...
Loading ...