Loading ...
Loading ...
Loading ...
Installation
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
• Insert the elbow through tile rear opening and connect it to
tile dryer internal duct.
• Apply duct tape on the joint between the dryer internal
duct and elbow, as shown on page 7.
CAUTION:
internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR
OF CABINET
PLATE
(KITWE1M454)
Connect standard metal elbows and ducts to complete the
exhaust system. Cover back opening with a plate (Kit
WE1M454) available from your local service provider.
Place dryer in final location.
I '_WARNING- NEVER LEAVE THE I
BACK OPENING WITHOUT THE PLATE.
For Questions on Installation, Call: 1-800-626-2000 (US) or
500A420P003 1-800-361-3400 (Canada). Pub. # 31-16139 8
instructions
[] CHANGING DIRECTION OF
DOOR OPENING
REMOVE4
HINGESCREWS.
REMOVE4HOLEPLUGSAND
PLACETHEMINTHEHOLES
ONTHEOPPOSITESIDE.
ROTATEDOOR1800
ANDREINSTALL.
[] SERViCiNG
_{k WARNING- LABEL ALL WIPES
PRIOR TO DISCONNECTION WHEN
SERVICING CONTROLS. WIRING
ERRORS CAN CAUSE IMPROPER AND
DANGEROUS OPERATION AFTER
SERVICING/INSTALLATION.
For replacement parts and other information, refer to
Owner's Manual for servicing phone numbers.