Loading ...
Loading ...
Loading ...
Installation Instructions:
[] DRYER EXHAUST TO RIGHT OR
BOTFOM CABINET
I--
IAkWARNING-BEFORE PERFORMING
THIS EXHAUST INSTALLATION, BE SURE
TO DISCONNECT THE DRYER FROM ITS
ELECTRICAL SUPPLY. PROTECT YOUR
HANDS AN DAR MS FROM S HARP EDGES
WHEN WORKING INSIDE TH ECABINET.
BE SURE TO WEAR GLOVES
REMOVE
SCREW
ANDSAVE.
REMOVE
DESIRED
KNOCKOUT
(0NEONLY).
Detach and remove the bottom, right or left side knockout
as desired. Remove the screw inside the dryer exhaust duct
and save. Pull the duct out of the drye_
FIXINGHOLE
B A
49"
Cut the duct as shown and keep portion A.
TAB LOCATION
BENDTAB
UP45o
Through the rear opening, locate the tab in the middle of
the appliance base. Lift the t:ab to about 45 using a fiat
blade screwdriver
7
ADDING NEW DUCT
FIXING
HOLE
PORTION"A"
Reconnect the cut portion (A) of the duct to the blower
housing. Make sure that the shortened duct is aligned with
the tab in the base. Use the screw saved previously to secure
the duct in place through the tab on the appliance base.
ADDING ELBOW AND DUCT FOR
EXHAUST TO RIGHT SIDE OF CABINET
• Preassemble 4" elbowwith 4" duct. Wrap duct tape
around joint.
• Insert duct assembly, elbow first, through the side opening
and connect the elbow to the dryer internal duck
CAUTION: Be sure not to pull or damage the
electrical wires inside the dryer
when inserting the duct,
l_ _i EXHAUST CAN
DUCT/"-,4,/ RIGHTSIDE
TAPE
•Apply duct tape as shown on thejoint between the dryer
internal duct and the elbow.
DUCT
CAUTION:
Internal duct joints must be
-_ secured with tape, otherwisethey may separate and cause
a safety hazard.
Loading ...