Loading ...
Loading ...
Loading ...
Installation
[] EXHAUST CONNECTION
,_WARNING - TO REDUCE THE RISK
OF FIRE OR PERSONAL INJURY:
This dryer must be exhausted to the outdoors.
Use only metal duct.
Do not terminate exhaust in a chimney, any gas vent,
under an enclosed floor (crawl space), or into an attic.
The accumulated lint could create a fire hazard.
Provide an access for inspection and cleaning of the
exhaust system, especially at turns. Inspect and clean at
least once a year.
Never terminate the exhaust into a common duct with a
kitchen exhaust. A combination of lint and grease could
create a fire hazard.
Do not obstruct incoming or exhausted air.
WE RECOMMEND THAT YOU INSTALL YOUR DRYER
BEFOREYOUR WASHER. THIS WILL PERMIT DIRECT
ACCESS FOR EASIEREXHAUST CONNECTION
THIS DRYERCOMES READY FORREAREXHAUSTING. IF
SPACEIS LIMITED, USE THE INSTRUCTIONS IN SECTION
12 TO EXHAUST DIRECTLYFROM THE LEFTSIDE OR
BOTTOM OF THE CABINET.
STANDARD REAR EXHAUST
WESTRONGLYRECOMMENDTHEUSEOF
RIGIDMETALEXHAUSTDUCT.IFUSING
FLEXABLEMETALDUCT,CUTITTOTHEPROPER
LENGTHANDAVOIDBUNCHINGOFTHEDUCT
BEHINDTHEDRYER.
Instructions
FORSTRAIGHT
LINEINSTALLATION,
CONNECTTHE ELBOWHIGHLY
DRYEREXHAUST -_ RECOMMENDED.
TOTHEWALLUSING
DUCTTAPE,
ELBOWHIGHLY
RECOMMENDED,-
RECOMMENDED
CONFIGURATION
TOMINIMIZE
EXHAUST
BLOCKAGE,
NOTE: ELBOWS WILL PREVENT DUCT
KINKING AND COLLAPSING.
[] LEVELING DRYER
LEVEL
FRONT-TO-BACK.
_. LEVEL
SIDE-T0-SIDE
4LEVELINGLEGS
STANDTHEDRYERUPRIGHTNEARTHE
FINALLOCATIONANDADJUSTTHE4LEVELING
LEGSTOMATCHTHEHEIGHTOFYOURWASHER,
ADJUSTTHE2ANTI-TIPLEGSTOCONTACT
THEFLOOR.
2ANTI-TIPLEGS
Loading ...
Loading ...
Loading ...