Loading ...
Loading ...
Loading ...
Appendices 31
To contact Mitsubishi customer service, see page 6.
TV Reset Comparison Guide
You can resolve many common TV problems using the
reset functions described in the following table.
iMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from the ANT input, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Format
PerfectColorTM/
PerfecTint TM
Reset (265
Series)
(for the single
input currently
being watched)
A/V Memory
Reset
(for the single
current input)
A/V Reset
(for all inputs)
Channel
Memorization
If the picture shape
seems incorrect, use
the FORMATkey to
change the picture
shape.
When the color
intensities seem out
of balance, use the
PerfectColor/PerfecTint
reset to reset the color
balances to the original
factory settings.
Both PerfectColor and
PerfecTint are reset at
the same time.
When audio and/
or video settings for
a single input seem
incorrect, use A/V
Memory Reset to
return the input to
the original factory
settings.
To reset audio and
video adjustments for
all inputs to the original
factory settings.
To erase and
re-memorize channels
on the ANT input.
Press FORMATto cycle through the
picture shapes available for the
signal.
1. While viewing the input to reset,
press MENUand go to Picture >
Perfect.
2. Press ENTERto display the
PerfectColor adjustment screen.
3. Press CANCELto reset the colors.
While viewing the input to reset,
press MENUand go to Picture >
Reset.
=
2. Press _'to highlight Reset.
3. Press ENTERagain to reset.
The last-used format for the signal
type will be recalled on the input.
Note: Also check the aspect
ratio feature on your cable box or
satellite receiver as this may be
altering the picture.
All PerfectColor/PerfecTint
sliders are reset to the original
center position. The PefectColor/
PerfecTint settings for other
inputs remain unchanged.
All Audio and Video settings for
the individual input are reset
except for the global settings
for audio Balance, Listen To,
Language, Video Mute, Smooth
120.
All Audio and Video settings are
returned to the original factory
settings, including global settings
not affected by Picture > Reset.
While viewing the TV, press the
control-panel buttons INPUTand
VOLUMEDOWNat the same time for at
least two seconds.
1. Press MENUand go to Setup >
Channel.
2. Highlight the reception mode,
e.g. Ant Air, and press ENTER.
3. Highlight All Channels and
pressENTER.
4. Highlight Scan.
5. Press ENTERto start channel
memorization.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created. To
add or delete individual channels,
see the Setup > Channel > Edit
menu instructions on page 27.
Lock Menu To change your Lock See the detailed owner's guide at www.mitsubishi-tv.com for instructions.
Pass Code menu pass code
For assistance call 1(800) 332-2119
Loading ...
Loading ...
Loading ...