Loading ...
Loading ...
Loading ...
• Prior to installation, ensure that the local distribution conditions
(voltage and frequency) and the adjustment of the appliance are
compatible.
• Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• The voltage, frequency, power and the country for which the
appliance has been designed are shown on the appliance rating
plate.
• For class I appliances, check that your home’s electrical system
provides proper earthing.
• The wall plug socket and plug should always be accessible.
• If a stationary appliance is not fitted with a supply cord and a
plug, or with other means for disconnection from the supply mains
having a contact separation in all poles that provide full
disconnection under overvoltage category III conditions, the
means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules. This is also applicable for
appliances with a supply cord and plug when the plug is not
accessible after installing the appliance. Using an omnipolar
switch with a contact separation of at least 3 mm fitted in the fixed
wiring will fulfil this requirement.
• The connection cable must hang freely and should not be fed
through a drawer.
• For connecting, use an approved cable with the correct cable
diameters appropriate for the connection. The cable casing should
be made of rubber (preferably of the H05V2V2 or H07V2V2 type).
• Before connecting the appliance, make sure the voltage indicated
on the rating plate conforms to the voltage in your power mains.
• The connection should be adjusted to the current and fuses.
• The appliance should not be connected to the mains via a
multi-plug adapter or extension cable, as the safe use of the
equipment cannot be guaranteed.
• After installation, the parts carrying electrical current and insulated
parts shall be protected against contact.
44
Installation
Loading ...
Loading ...
Loading ...