Loading ...
Loading ...
Loading ...
INFORMATION!
To avoid overheating, the electronic control system may automatically deactivate boost prematurely
and decrease the power level to 12.
If there is no suitable pan on the cooking zone, the set level of temperature will flash. After one
minute, the cooking zone will be switched off.
Move function
If you remove the pan from an active cooking zone and within 6 seconds place it on a different
cooking zone, all the timer and cooking-related settings can be transferred to the new cooking zone
by touching the slider of the new cooking zone. To indicate this possibility, the new cooking zone
displays copied settings on the slider. When the confirmation is done, the previous cooking zone is
deactivated.
Automatic cooking zone bridging
Two adjacent square cooking zones can be merged into a single large cooking zone. Pan position
recognition is activated automatically after the appliance is switched on. When a pan will be placed
on the hob, the pan recognition function will recognize its position and automatically connect the
bridge cooking zones depending on the size of the pan (only when hob was already switched on).
The power level or temperatures are displayed simutaneously on both bridged cooking zones, but
the power level or temperature can only be adjusted on the left or upper slider.
You can un-bridge or manualy bridge the cooking zone by touching the two corresponding sliders
at the same time.
Chef mode
(only on type models: HID956MC HID956MFC HID956GC)
In this mode, all cooking zones are switched on simultaneously and the cooking hob is divided into
three zones.
• On all left-hand side cooking zones, power level 12 is automatically activated.
• On all middle cooking zones, power level 7 is automatically activated.
• On all right-hand side cooking zones, power level 1 is automatically activated.
Power levels can then be adjusted to any value.
19
Operation
Loading ...
Loading ...
Loading ...