Loading ...
Loading ...
Loading ...
42. Wrap the Low Cable (75) around a 3 1/2" Pulley (24)
in the direction shown. Attach the Pulley to the lower
half of the Pulley Frame (22) with a 3/8" x 1 3/4" Bolt
(57) and a 3/8" Nylon Locknut (50).
43. Wrap the Low Cable (75) around a 3 1/2" Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the welded bracket on the Weight Base
(5) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut
(50). Make sure the Cable Trap is oriented as
shown,
Route the Low Cable (75) through the welded bracket
on the Press Base (6) as shown.
42
43 50 25 24 54
Bracket
........ Welded
Welded
Bracket
75
44. Wrap the Low Cable (75) around a 3 1/2" Pulley (24)
in the direction shown. Attach the Pulley to the weld-
ed bracket on the Press Base (6) with a 3/8" x 1 3/4"
Bolt (57) and a 3/8" Nylon Locknut (50).
45. Wrap the Low Cable (75) around a 3 1/2" Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the second hole from the bottom of the
Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54)
and a 3/8" Nylon Locknut (50). Make sure the Cable
Trap is oriented as shown,
75
57
23
75
19
Loading ...
Loading ...
Loading ...