Loading ...
Loading ...
Loading ...
20, Wrap the Butterfly Cable (73) around a "V'-Pulley
(27) in the direction shown, Attach the "V'-Pulley and
a Large Cable Trap (32) to the welded bracket on the
beck of the Butterfly Upright (t) with a 3/8" x 2 1/2"
Bolt (53) and a 3/8" Nylon Locknut (50), Make sure
that the Large Cable Trap is turned as shown.
2O
Welded Bracket
32 27
21, Remove both 3 1/2" Pulleys (24) and Cable Traps
(25) from the pre-assembled Adjustable Pulley Plates
(23),
Wrap the Butterfly Cable (73) around a 3 1/2" Pulley
(24) in the direction shown, Attach the Pulley to the
top hole in the Adjustable Pulley Plates (23) with a
3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50),
Make sure the Cable Trap end the Adjustable
Pulley Plates ere oriented as shown in the draw=
ing.
21
73
50
22. Wrap the Butterfly Cable (73) around a "V"-Pulley
(27) in the direction shown. Attach the "V"-Pulley and
a Large Cable Trap (32) to the welded bracket (not
visible in the drawing) on the back of the Butterfly
Upright (1) with a 3/8" x 2 1/2" Bolt (53) and a 3/8"
Nylon Locknut (50). Make sure that the Large Cable
Trap is oriented as shown,
22
53
\
Bracket
5O
j73
23, Attach the Butterfly Cable (73) to the welded bracket
on the Right Butterfly Arm (10) with a 3/8" x 1" Bolt
(84) and two 3/8" Nylon Jam Nuts (63), Note: The
loop on the Cable and the two Nylon Jam Nuts
must be mounted underneath the welded bracket.
23
Welded 84
Bracket _J
73
12
Loading ...
Loading ...
Loading ...