Loading ...
Loading ...
Loading ...
43TROUBLESHOOTING
ENGLISH
Parts & Features
Food does not broil
properly
Oven controls improperly set.
• Make sure you select the Broil mode properly.
Improper rack position being used.
• See the Broiling Guide.
Cookware not suited for broiling.
• Use broiling pan and grid.
Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as
recommended.
• See the "Operating the Oven" section in the Operation chapter.
In some areas the power voltage may be low.
• Preheat the broil element for 5-7 minutes. See the Broiling Guide.
Oven temperature
too hot or too cold
Oven sensor needs to be adjusted.
• See the "Temperature Adjustment" section in the Operation chapter.
Excessive smoking
during a Self Clean
cycle
Excessive soil.
• Turn off the Self Clean function. Open the windows to rid the room of smoke. Wait until the
Self Clean mode is cancelled. Wipe up the excess soil and reset the self clean.
Burning or oily odor
emitting from the
vent
This is normal in a new oven.
• This will disappear in time. To speed the process, set a Self Clean cycle for a minimum of 3
hours. See the Self Clean section. (On some models)
Moisture collects on
oven window or
steam comes from
oven vent
This happens when cooking foods high in moisture.
• This is normal.
A very wet cloth was used when cleaning the window.
• Do not use too much water when cleaning the window.
Warm air venting
into kitchen after
oven has been
turned off.
Warm air exhaust is needed to maintain and cool down oven temperatures. It turns off
automatically when the heat cools to a safe temperature.
• This is normal.
Problem Possible Cause & Solution
Oven control beeps
and displays any F
code error.
Electronic control has detected a fault condition.
• Turn off the oven function you are using to clear the display and stop beeping. Reprogram
oven. If fault recurs, record fault number and call for service.
- [Case 1 ]
Code: F-9
Cause: Oven not heating (upper oven)
- [Case 2 ]
Code: F-19
Cause: Oven not heating (lower oven)
k is on in the display
when you want to
cook
The oven door is locked because the temperature inside the oven has not dropped
below the locking temperature.
• Allow the oven to cool.
Oven light does not
work.
It is time to replace the bulb or the bulb is loose.
• Replace or tighten bulb. See "Changing the Oven Light" section in this Owner’s Manual.
Problem Possible Cause & Solution
en-us_main.book.book Page 43 Friday, February 10, 2023 8:53 AM
Loading ...
Loading ...
Loading ...