LG Electronics WDEP9423F LG 9.4 Cu. Ft. PrintProof Stainless Steel Smart Double Wall Oven WDEP9423SS

Owner's Guide - Page 17

For WDEP9423F.

PDF File Manual, 108 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
17OPERATION
ENGLISH
2 Carefully insert the rack between the rack
guides, and slide it back until the shelf drops
into place.
a Rack Guides
3 Once the rack is secured in the back, pull the
entire rack forward until the rack locks into
place.
Removing Gliding Racks
1 With the rack in the closed position, grasp the
front of the rack and frame and lift up. Slowly
push the rack towards the back wall until it is
free of the rack stop.
2 After disengaging the rack stop, lift the back
of the rack and pull the rack and frame out
between the rack guides.
Convection Bake and Roast Mode
The convection system uses a fan to circulate the
heat evenly within the oven. Improved heat
distribution allows for even cooking and excellent
results while cooking with single or multiple racks.
The oven can be programmed to bake at any
temperature from 170 (80 ) to 550 (285 ).
The default temperature is 350 (175 ).
Using Convection
1 Press Conv. Bake or Conv. Roast for the
upper or lower oven.
2 Press the numbers to enter the desired
temperature.
3 If desired, press Cook Time to set the cook
time or Start Time to set the delayed start
time. Press the numbers to set the time
settings.
4 Press START. The oven starts to preheat.
5 If the cook time is set, the remaining time
appears in the display. If a delayed start time
is set, the start time appears in the display.
6 A chime sounds once preheating is complete.
7 A chime sounds at the end of the set cook
time and a notification appears in the display.
Open the oven door and remove the food.
NOTE
If no cook time is set, the oven turns off
automatically after 12 hours.
The heating elements and fan turn off
immediately when the door is opened. They turn
on again approximately 1 second after the door
is closed.
A
B
C
D
E
en-us_main.book.book Page 17 Friday, February 10, 2023 8:53 AM
Loading ...
Loading ...
Loading ...