Loading ...
Loading ...
Loading ...
Portable Air Conditioner Installation Instructions 9
Installation Instructions
EXHAUSTING HOT AIR
In “Cool” mode, the appliance must be
placed close to a window or opening so that
the warm exhaust air can be ducted outside.
First, position the unit on a at oor. Next,
make sure there’s a minimum of 18"(45cm)
clearance around the unit and that it is
within the vicinity of a single circuit outlet
or power source.
1. Extend either side of the Hose (
Fig. 1)
and screw the Hose Inlet ( Fig. 2).
2. Extend the other side of the Hose
and screw it to the Hose Outlet (
Fig. 3).
3. Install the Hose Inlet into the unit (
Fig. 4).
4. Afx the Hose Outlet into the Window
Slider Kit and Seal (
Fig. 5 and
Fig. 6).
Make a cut on
the opposite
side of the
hole.
Your Window Slider Kit has been designed
to t most standard vertical and horizontal
window applications; however, it may be
necessary for you to modify some aspects
of the installation procedures for certain
types of windows. The Window Slider Kit
can be fastened with screws.
NOTE: If the window opening is
less than the minimum length of
the Window Slider Kit, cut the end
without the hole in it to make it
short enough to t in the window
opening. Never cut out the hole in
the Window Slider Kit.
Fig. 1
Vertical
Window
Fig. 5
Window Slider
Fig. 6
Window Slider
Horizontal
Window
Fig. 2
Fig. 3
Slide Into
Fig. 4
Extend The Sides
Of The Hose
Loading ...
Loading ...
Loading ...