Loading ...
Loading ...
Loading ...
6 Important Safety Instructions Portable Air Conditioner
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory, or mental capabilities,
or with lack of experience and knowledge,
unless they are under adult or guardian
supervision or have been given instructions
on the proper and safe use of this appliance.
Children should be supervised to ensure
that they do not play with the appliance.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent, or a similarly qualied person to
avoid hazards.
Installation of this appliance should be
done in accordance with national wiring
regulations.
IMPORTANT −
GROUNDING METHOD
This product is factory equipped with
a power supply cord that has a three-
pronged grounded plug. It must be
plugged into a mating grounding type
receptacle in accordance with the National
Electrical Code and applicable local
codes and ordinances. If the circuit does
not have a grounding type receptacle, it
is the responsibility and obligation of
the customer to exchange the existing
receptacle in accordance with the National
Electrical Code and applicable local codes
and ordinances. The third ground prong
should not, under any circumstances, be cut
or removed. Never use the cord, the plug,
or the appliance when they show any sign of
damage. Do not use your appliance with an
extension cord unless it has been checked
and tested by a qualied electrical supplier.
Improper connection of the grounding plug
can result in re, electrical shock and/
or personal injury. The appliance must be
properly grounded. When in doubt, check
with a qualied service representative.
ELECTRICAL CONNECTIONS
Before plugging the appliance into the
main socket, check that:
· The main power supply corresponds
to the value indicated on the rating
plate at the back of the appliance.
· The power socket and electrical circuit
are adequate for the appliance.
· The main socket matches the plug. If this
is not the case, have the plug replaced.
· The main socket is adequately earthed.
Failure to follow these important safety
instructions absolves the manufacturer
of all liability.
FCC STATEMENT
The device complies with the local national
regulations. In USA, this device complies
with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
This device has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This device generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this device does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
Loading ...
Loading ...
Loading ...