Loading ...
Loading ...
Loading ...
Portable Air Conditioner Operating Instructions 13
Programming Start Up
1. Turn on the appliance and choose the
mode you want. For Example: Cool,
75°F (24°C), high fan speed. Turn off the
appliance.
2. Press the “Timer” button. The symbol
and number of hours will ash.
3. Press the button to set the number of
hours of delay before the appliance turns
on. The Timer can be set to intervals of
1hour to 24 hours.
When using the appliance in this mode,
there is no need to attach the Air Hose.
1. Press the button a few times until the
“Fan” symbol appears.
2. Select the required fan speed by pressing
the button. Two speeds are available:
High / Low.
The screen will display as high speed
and as low speed.
Ideal for reducing room humidity (during
spring and autumn, rainy periods, and in
damp rooms, etc).
In “Dry” mode, the appliance should be
prepared in the same way as “Cool” mode,
with the Air Exhaust Hose attached to
enable the moisture to be discharged
outside.
To Set This Mode Correctly:
1. Press the button a few times until
the “Dry” symbol appears. The screen
will display the symbol.
2. In this mode, fan speed is selected
automatically. It cannot be set manually.
SETTING THE TIMER
FAN MODE DRY MODE
VRM050518N / VRM050520N
N.B.:
· When operating in very cold rooms, the appliance defrosts automatically, momentarily
interrupting normal operation. During this operation, it is normal for the noise from
the appliance to change.
· In this mode, you may have to wait for a few minutes before the appliance starts
producing hot air.
· In this mode, the fan may operate for short periods, even though the set temperature
has already been reached.
High Speed
Low Speed
This Timer can be used to delay the start-up or shutdown of the appliance. This prevents
electricity from being wasted, by optimizing operating periods.
4. A few seconds after the Timer is set,
the unit will memorize that setting.
The “Timer” indicator will light up and
the display will show that the unit is on
standby.
5. Press the “Timer” button again, or
the button, to cancel the Timer. The
“Timer” symbol will disappear from
the screen.
Loading ...
Loading ...
Loading ...