Loading ...
Loading ...
Loading ...
Portable Air Conditioner Remote Control 17
When using the appliance in this mode,
there is no need to attach the Air Hose.
1. Press the button a few times
until the symbol appears.
2. Select the required fan speed by pressing
the button. Two speeds are available:
High / Low.
FAN MODE
*This means only the heat pump model
has “Heat” mode.
If the appliance is a cooling only model,
when you choose “Heat” mode, “Fan” mode
will turn on.
To Set This Mode Correctly:
1. Press the button a few times until
the symbol appears.
2. Select the target temperature 55—81°F
(13—27°C) by pressing the or
button until the corresponding value
is displayed.
3. Select the required fan speed by pressing
the button. Three speeds are
available: High / Low / Auto.
HEAT MODE*
VRM050518N / VRM050520N
N.B.:
· When operating in very cold rooms, the appliance defrosts automatically, momentarily
interrupting normal operation. appears on the display. During this operation, it is
normal for the noise from the appliance to change.
· In this mode, you may have to wait for a few minutes before the appliance starts
producing hot air.
· In this mode, the fan may operate for short periods, even though the set temperature
has already been reached.
4. Water is removed from the air
and collected in the tank.
5. When the tank is full, the appliance shuts
down and the symbol appears on the
display. The tank cap must be extracted
and emptied. Drain off all the water left
into a basin. When all the water has been
drained, put the cap back in place.
6. When the tank has been emptied,
the appliance will start up again.
Loading ...
Loading ...
Loading ...