Loading ...
Loading ...
Loading ...
Adjusting the Tension Control Knob
To increase the resistance, turn the tension control knob in a clockwise direction.
To decrease the resistance, turn the tension control knob in a counterclockwise
direction.
Adjusting the Seat Height
Turn the seat height adjustment knob in a counter-clockwise direction until the seat
post can be slid up or down. Slide the seat post to a confortable position and then lock
the seat post in place by tightening the seat height adjustment knob in a clockwise
direction.
NOTE: When adjusting the height of seat post, make sure the MAX line on the
right side of the seat post does not exceed the plastic bushing.
STORAGE:
For your convenience, the bike can be folded up and relocated.
1. Remove the Safety Pin A (22) from the upper hole on the Rear Frame (1) and
remove the Safety Pin B (62) from the Computer Post (17).
2. Push the Rear and Front Frames (1, 2) together until they are at their closest
position. Then reinsert the Safety Pin A (22) into the lower hole on the Rear Frame
(1) to lock the Rear and Front Frames (1, 2) together.
3. Pivot the Computer Post (17) down and reinsert the Safety Pin B (62) into the hole
from which it was removed.
4. Push the Front Frame Support Tube (16) into the Front Frame Support Tube
Holder (98).
5. Pivot th Back Cushion (77) down to lay flat against the Seat Cushion (6).
ADJUSTMENTS
15
Loading ...
Loading ...
Loading ...