Loading ...
Loading ...
Loading ...
©
2020 DJI All Rights Reserved.
97
MATRICE 300 RTK User Manual
Intelligent Flight Battery
Capacity 5935 mAh
Voltage 52.8 V
Battery Type LiPo 12S
Energy 274 Wh
Net Weight (Single One) Approx. 1.35 kg
Operating Temperature -4° to 122°F (-20° to 50°C)
Storage Temperature 71.6° to 86°F (22° to 30°C)
Charging Temperature 41° to 104°F (5° to 40°C)
Max Charging Power 470 W
Auxiliary Light
Eective Illumination Distance 5 m
Illumination Mode 60 Hz, solid on
FPV Camera
Resolution 960p
FOV 145°
Frame rate 30fps
* Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies and in some regions
the 5.2 GHz frequency band is only allowed for indoor use.
** The Smart Controller will supply power for the mobile device installed, which may affect the above-mentioned
specications.
Firmware Update
Use the DJI Pilot app or the DJI Assistant 2 for Matrice to update the remote controller, aircraft and
other connected DJI devices.
For the Zenmuse Z30, XT S and XT2, only aircraft firmware can be updated via DJI Assistant 2 for
Matrice or the DJI Pilot app. Gimbal rmware must be updated via a microSD card.
The rmware of the Zenmuse P1 cannot be updated using DJI Assistant 2 for Matrice. If the rmware
of the aircraft is updated using DJI Assistant 2 for Matrice while the Zenmuse P1 is attached, only the
aircraft rmware will be updated. Use an SD card or DJI Pilot to update the rmware of Zenmuse P1.
The CSM Radar is not supported when using an aircraft rmware version of v01.00.0214 or earlier.
Update the aircraft rmware to use the radar. Make sure the CSM Radar is correctly mounted to the
aircraft and follow the prompts in the app to update the CSM Radar rmware.
Using DJI Pilot
1. Ensure that there is good connection between the aircraft and remote controller and other DJI
devices used with the aircraft, and that all the devices are powered on.
2. Go to the app. A prompt will appear if new firmware is available for download. Follow the on-screen
instructions to update the rmware. Make sure to connect to the Internet when downloading the rmware.
The firmware of the following devices can be updated via DJI Pilot when connected to the
aircraft (The aircraft rmware will also be updated simultaneously):
Zenmuse P1, Zenmuse H20, Zenmuse H20T, DJI ENTERPRISE X-Port, DJI CSM Radar
Loading ...
Loading ...
Loading ...