Loading ...
Loading ...
Loading ...
30
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
Activation
Use DJI Pilot app and follow the instructions below to activate the Battery Station.
1. Connect the Battery Station to a power outlet and press the Power Button to turn on the Battery
Station. Connect the Battery Station to the remote controller using a USB-C cable.
2. Turn on the remote controller and run the DJI Pilot app.
3. Follow the app instructions to activate the Battery Station.
Using the Battery Station
Charging
1. Connect the Battery Station to a power outlet (100-120 Vac, 50-60 Hz / 220-240 Vac, 50-60 Hz) via
the AC power cable.
2. Press the Power Button once to turn on the Battery Station.
3. Insert the batteries into the Battery Ports to start charging.
a. Wi
th a 100-120 V input, it takes about 70 minutes to fully charge the TB60 battery, and 40
minutes to charge from 20% to 90% battery level.
b. Wit
h a 220-240 V input, it takes about 60 minutes to fully charge the TB60 battery, and 30 minutes
to charge from 20% to 90% battery level.
For TB60 Intelligent Flight Batteries, the Battery Station will charge the two batteries with the
most amount of remaining battery power rst. For example, if there are four TB60 batteries
plugged into the Battery Station (the rst two batteries have 10% remaining battery power
and the second two batteries have 30% remaining battery power), the Battery Station will
automatically charge the batteries with the highest remaining battery power rst.
For WB37 Batteries, the Battery Station will charge the battery with the highest remaining
battery power rst.
When the temperature of the battery is too low, it will warm up automatically before charging.
Power Outlet
Loading ...
Loading ...
Loading ...